Schlenk-Product:
- ETP-copper foil
- Silver foil
- Nickel foil Our foils are mainly used in rechargeable batteries, but also in primary batteries. The producer of Li-Ion-batteries uses our foil with Cu-Treatment to enhance the result of their graphite coating.
Foil for coating is used plain as well as in perforated or expanded form.
Silver foil and nickel foil is mainly used in the plain condition.
For tabbing of battery cells our customers use mainly Cu-treated copper foil, treated both sides, slit to narrow widths.
Standard specification:
Base-material:
- ETP-Copper foil E-Cu58 (BS: C101 ; CDA 110) , plain or with Cu-Treatment
- Silver foil, plain
- Nickel foil, plain
Strip thickness: 0.010 mm - 0.100 mm (0.0004" - 0.004")
Width: 1 mm - 650 mm (0.04" - 25.6")
(depending on strip thickness)
silver foil only availabe up to 350 mm (13.8")
Format:
available in coil or cut to sheets, not levelled
Coil sizes:
ID: 150 mm (6") plastic core
ID: 76 mm (3") steel core
Other cores-ID on request
Tabbing foils are available on special plastic cores with side-shields or on traverse wound spools. ID‘s for special cores and spools on request. 
Advantages of Schlenk‘s foils:
- high purity metals
- high electrical conductivity
- special Cu-treated surface giving a very good bond after graphite coating
Lot sizes:
We supply small lots for R&D, quickly and with the utmost flexibility as well as large lots up to complete container loads.
>> PDF (mm) >> PDF (inch)
all information contained herein is believed to be reliable, but the accuracy and completeness thereof are not guaranteed. The user shall determine the suitability of the product for the intended application. |
![[english]](fileadmin/images/icons/flag-en_ACT.gif){kind=icon}
