Cubrotec
Lamellar copper powders for use in contact materials, lubricants and in the chemical industry are produced when copper powder atomized in air is processed in the following ball milling procedures.
Applications:
Chemical technical applications
Lubricants
Contact materials
Technical plastics, compounds
Product Name | D 50 value [µm] | Grease content [%] | Copper content [%] | Sieve analysis [%] | Apparent density [g/cm³] | Fluidity | Application |
---|---|---|---|---|---|---|---|
Cubrotec 6000 | approx. 34 | max. 0.2 | min. 98 % | >45µm: max.5 | approx. 1 | not flowable | |
Cubrotec 5000 | approx. 38 | max. 0.3 | min. 98 % | >45µm: max.6 | approx. 1 | not flowable | |
Cubrotec 7001 | approx. 14 | approx. 1.4 | min. 95 | >75µm:Spuren >45µm: max.3 | approx. 0.7 | not flowable | |
Cubrotec 7002 | approx. 20 | approx. 0.6 | min. 96 | >45µm:Spuren | approx. 0.8 | not flowable | |
Cubrotec 8000 | approx. 4 | approx. 0.5 | min. 95 | >45µm:Spuren | approx. 0.8 | not flowable | |
Cubrotec 8001 | approx. 3 | approx. 1.5 | approx. 95 | >45µm:Spuren | approx. 0.6 | not flowable |