Extended Coil Calculator

Weight / length, values per coil, number of coils

ft
lbs
This is a required field
in
This is a required field
Thickness must not be less than 0,006 mm (.00025”).
Thickness must not exceed 0,500 mm (0.020”).
Thickness must not exceed 0,500 mm (0.020”).
Thickness must not be less than 0,006 mm (.00025”).
in
This is a required field
Width must not be less than 0,6 mm (.024”).
Width must not exceed 660 mm (26.00”).
Width must not exceed 660 mm (26.00”).
Width must not be less than 0,6 mm (.024”).
in
This is a required field
The outer diameter must be larger than the inner diameter.
This is a required field
This is a required field
* Required field
Results:
Total weight:
Total length:
Weight per coil:
Length per coil:
Weight in oz/sqft (305g/m² = 1oz/sqft):
Length per coil:
Weight per coil:
Number of coils:
Send inquiry: You can forward your results directly to us and we will be happy to advise you personally!
Note: The calculation tool is a non-binding support program for individual specifications and does not replace the expert advice of one of our sales consultants. No guarantee can and will be given for information and results from the tool. Furthermore, the use of the tool does not constitute an offer of contract on the part of Schlenk or the acceptance of a customer request.

We produce thinnest foils and strips from non-ferrous metals (e.g. Copper Foil) according to your individual ideas. With our practical Coil Calculators, you can calculate the key figures yourself and thus obtain detailed information on the requirements of your project.


Basic Coil Calculator

Simply enter the desired values and calculate the outside diameter, the total weight or the total length.